Acopia Networks ARX 6000 Manual do Utilizador descarregar pdf (Página 3)

GUI Quick Start: Network Setup 1-1

GUI Quick Start: Network

Use this document to connect to the FreedomFabric™ Graphical User Interface (GUI)

for the first time, and provide the network-configuration parameters for the Acopia

Adaptive Resource Switch (ARX).

Before you begin, perform the initial-boot process as described in the appropriate

Hardware Installation manual: ARX®500 Hardware Installation Guide, ARX®1000

Hardware Installation Guide, or ARX®6000 Hardware Installation Guide. These

manuals describe how to set up the out-of-band (OOB) management interface, along

with a username and password for an administrative account.

Connecting to the GUI

The ARX is initially provisioned to accept Secure HTTP (HTTPS) access over its

OOB interface. Use the IP address for the OOB in an HTTPS URL:

https://oob-address/

where oob-address is the IP address configured during the initial-boot process.

You must access the ARX from a host on the OOB network, which must be separate

from any subnet with clients and servers. The

Initial Setup wizard (described below)

creates another management interface that you can later access from the client/server

network.

For example, this connects to the ARN manager at 10.1.1.7:

1 2 3 4 5 6 7 8 ... 19 20

Sem comentários

Acopia Networks ARX 6000 Manual do Utilizador Página 3